|
Accessing
The Cisco 67x DSL Modem
Q:
How Do I Connect to the Cisco 67x DSL Modem through Hyperterminal?
A:
-
Connect the DSL Modem to the power, and connect the Management
cable. (Note: The management cable should plug into your first
serial port, COM1)
- Open a Hyperterminal
session. Start/Program Files/Accessories/Communications/HyperTerminal
- Your Configuration
for Hyperterminal should look like the one below.
- Click OK.
Now Hit the enter key to get the prompt. You are now in the router.
Once In, this
is what the screen should look like. 
Q:
How Do I Configure the Cisco 675 DSL Modem for PPP Mode?
A: Login
with Hyperterminal. (Click Here for Commands)
Q:
How Do I Configure the Cisco 675 DSL Modem for Bridging Mode?
A: Login
with Hyperterminal. (Click Here for Commands)
Q:
How Do I Configure the Cisco 678 DSL Modem for PPP Mode?
A: Login
with Hyperterminal. (Click Here for Commands)
Q:
How Do I Configure the Cisco 678 DSL Modem for Bridging Mode?
A: Login
with Hyperterminal. (Click Here for
Commands)
|
